名词订正:每一个区域叫zone, 每一个在区域中的活动的实体叫tenant 可以做的东西: - 需要做调度器,做成插件的形式,可以打开,可以关闭(全功能的调度器现在似乎还不是必须) - 板子上跑hvisor,现在还没有在一个实体的板子上面跑过 - 操作系统的snapshot, reboot - 操作系统重启,操作系统(热)升级,镜像升级 - hvisor升级 - 热迁移 - 仔细研究一下设备树是怎么探测,怎么使用的 -hypervisor对内存碎片的管理
韩喻泷: 已经完成了一个shell,继续龙芯,目标启动一个linux
陈林锟: 合并代码 1. 负责合并代码 arch dev/virt 参考bao/jailhouse/xvisor/acrn/kvm tools/ko docs/ ko 2. 先启动两个Linux,调网络,调RCU blk设备还是有问题,可能跟gic有关系
李柯樾: 加入aia就行了 改造一下,先启动第一个linux,让后手动启动第二个 写文档,写论文 灵活性的
杨竣轶: 上riscv板子,FPGA 协助陈星宇修改文档,交给李国玮复现 更新hvisor的功能 调度器,杀掉os,起新的os 命令行工具
snapshot
陈星宇: 重新修改文档,交给李国玮复现 1. 文档要写一下,陈星宇,李国玮,韩喻泷复现 2. 文档里面把DTB怎么修改的,和源代码的关系写清楚 驱动smmu,先在qemu上面跑过,然后在硬件上跑过 在qemu里面有没有dma的虚拟设备
李国玮: 毕业设计的目标可以不在板子上跑 加入虚拟网络的时候会出现错误,无法启动。 virtio mmio bus,看一下咋回事,写一个文档 调一下为啥收不到网络包 尽量去上板 暑假 - 上arm板子 命令行工具
李韶航: 继续看这部分代码Rust for APLIC, AIA 关键是搞清楚设备是怎么触发中断的 硬件过程,软件过程都是什么样的 功能描述和实验过程 改成64位,何李柯樾讨论做的具体内容
徐仲锴: riscv的虚拟地址部分 代码需要运行一下,所有练习都要做一下 任务:上板子
刘景宇: 1. 完善bao里面的AIA 2. 对比对象:bao-arm/bao-PLIC/bao-AIA 3. 测试spec/以及一个关于虚拟化的测试集 看一次MSI的东西 opensbi是如何处理的设备树的
-----Original Messages----- From:李国玮 15035660024@163.com Send time:Tuesday, 03/12/2024 14:24:36 To: hypervisor hypervisor@syswonder.org Subject: [Hypervisor] 矽望社区hypervisor项目组技术讨论例会通知20240313
各位老师和同学好:
hypervisor组例会时间定为本周三2:00-5:00。 会议地点:北京市海淀区草桥7号院北京开源芯片研究院,415雁栖湖会议室 会议议程: 可以做的东西:需要做调度器,做成插件板子上跑hvisor操作系统的snapshot, reboot操作系统重启,操作系统(热)升级,镜像升级hvisor升级热迁移韩喻泷:继续龙芯,目标启动一个linux陈林锟:rcu相关的bug合并代码1. 负责合并代码archdev/virt参考bao/jailhouse/xvisor/acrn/kvmtools/kodocs/ko2. 先启动两个Linux,调网络,调RCUblk设备还是有问题,可能跟gic有关系李柯樾:SBI是跳不过的。RustSBI/OpenSBI都可从m态跳入trap之后回不到虚拟机了杨竣轶:- 上riscv板子- 了解一下上面的任务- 协助陈星宇修改文档,交给李国玮复现陈星宇:重新修改文档,交给李国玮复现1. 文档要写一下,陈星宇,李国玮,韩喻泷复现2. 文档里面把DTB怎么修改的,和源代码的关系写清楚驱动smmu,先在qemu上面跑过,然后在硬件上跑过在qemu里面有没有dma的虚拟设备 李国玮:毕业设计的目标可以不在板子上跑加入虚拟网络的时候会出现错误,无法启动。尽量去上板暑假- 上arm板子李韶航:继续看这部分代码Rust for APLIC, AIA关键是搞清楚设备是怎么触发中断的硬件过程,软件过程都是什么样的功能描述和实验过程 徐仲锴:riscv的虚拟地址部分代码需要运行一下,所有练习都要做一下上板子刘景宇:1. 完善bao里面的AIA2. 对比对象:bao-arm/bao-PLIC/bao-AIA3. 测试spec/以及一个关于虚拟化的测试集 请大家关注。