本学期开会时间:暂定周三下午。
杨竣轶: 1. 文档要写一下,陈星宇,李国玮,韩喻泷复现 2. 文档里面把DTB怎么修改的,和源代码的关系写清楚
李国玮: 研究一下qemu下的virtio-blk的实现代码 c翻译为rust(不需要做) virtio-net
李柯樾: 已经完成单核的linux的启动 1. 与李国玮交流一下virtio-blk怎么弄,为啥不固定地址不行(可能是DMA引起的问题) 2. 陈林锟合并代码 3. 写文档
陈林锟: 1. 负责合并代码 arch dev/virt 参考bao/jailhouse/xvisor/acrn/kvm tools/ko docs/ ko 2. 先启动两个Linux,调网络,调RCU blk设备还是有问题,可能跟gic有关系
陈星宇: 1. 中断部分如何工作 2. DMA是怎么干的
李韶航: 徐仲锴: riscv的虚拟地址部分 代码需要运行一下,所有练习都要做一下 上板子
刘景宇: 1. 完善bao里面的AIA 2. 对比对象:bao-arm/bao-PLIC/bao-AIA 3. 测试spec/以及一个关于虚拟化的测试集
李国玮: 研究一下qemu下的virtio-blk的实现代码 c翻译为rust(不需要做) virtio-net
韩喻泷: 集中精力做龙芯的hypervisor
李栋: 找FPGA板子/sifive
-----Original Messages----- From:李国玮 15035660024@163.com Send time:Thursday, 02/22/2024 18:17:16 To: hypervisor hypervisor@syswonder.org Subject: [Hypervisor] 矽望社区hypervisor项目组技术讨论例会通知20240223
各位老师和同学好:
hypervisor组例会时间定为本周五2:00-5:00。 会议地点:北京市海淀区草桥7号院北京开源芯片研究院,415雁栖湖会议室 会议议程: 杨竣轶:1. 提交文档2. 安装ubuntu开发环境3. 继续启动linux4. 串口初始化陈星宇:1. 中断部分如何工作2. DMA是怎么干的韩喻泷:搞一个裸机程序,往指定的串口输出。注意,串口需要初始化。然后是MMIO。看一下串口的规范 8250/16550李国玮:研究一下qemu下的virtio-blk的实现代码c翻译为rust(不需要做)virtio-net李柯樾:继续riscv虚拟机陈林锟:先启动两个Linux,调网络,调RCU李韶航:riscv的虚拟地址部分 刘景宇:spec2017运行起来,在Qemu里面继续运行起来 请大家关注。