李柯樾: risc-v 开题报告
李国玮: root的el0读到non-root发来的virt-io的请求 一个独立的ko 两个方案:通过el2来处理同步的virtio请求,通过共享内存来处理异步的virtio请求
杨竣轶: 先把uart3和uart4使用起来 dts和cell是怎么配合
陈林锟: ivshmem 设计,具体看看要做啥
陈星宇: 在新的nxp板子上面搞一下uart3 dts和cell是怎么配合
李韶航: S态的页表机制 ptrace系统调用 单步执行 执行 monitor一个地址访问 riscv的h扩展
刘景宇: 继续跑两个linux 看arm和riscv的特权态模式
-----原始邮件----- 发件人:李国玮 15035660024@163.com 发送时间:2023-12-14 18:32:13 (星期四) 收件人: hypervisor hypervisor@syswonder.org 主题: [Hypervisor] 矽望社区hypervisor项目组技术讨论例会通知20231215
各位老师和同学好:
hypervisor组例会时间定为本周五2:00-5:00。 会议地点:北京市海淀区草桥7号院北京开源芯片研究院,后院芯议厅 会议议程: 韩喻泷: 买nxp的板子启动两个linux,分别通过两个串口去控制两个linux李国玮:virtio-device都在root的el0中实现李韶航:目标:SysHyper运行在RISC-V下面看手册,讲手册刘景宇:目标:RISC-V的hypervisor和ARM的hypervisor的对比虚拟化测试的benchmark先跑两个linuxRISCV-bao两个处理器体系结构的虚拟化技术的对比可以先写个文档出来杨竣轶:1. 研究printk打印到不同的串口中。2. 研究怎么把console绑定到对应的驱动程序中?写一个文档。 请大家关注。